How To Fix Computer Freeze Problem

Computer freeze is a common PC problem. Your PC was working absolutely fine, but suddenly it freezes up. You are at a loss. How to fix the problem? Go through this article and find the reasons why your computer freezes up and how to fix the problem.

Are you thinking why a computer freezes up? There are many reasons for which this problem occurs. Your PC was working fine and after installing a program the problem starts then it is due to that software application. In many cases, viruses also cause the problem. If the computer overheats then it could cause the PC freeze problem. Sometimes, random lockups occur due to the computer memory.

Whatever the reason behind your computer freeze is, you need to get it fixed. You have two options to perform this task. Firstly, there are many computer repair companies that offer tech support to the computer users for resolving PC freezing problem. Or you can try resolving the problem on your own. Given below are some useful tips that you can employ to resolve the issue.

If the problem starts after installing a certain program, better uninstall the newly installed application. The problem should get fixed. If you dont know how to uninstall the program, go to Control Panel and then click Add Remove Programs, select the particular program and uninstall it.

Your computer was working find and if suddenly lockups occur, then it might be an application that caused the issue. Just press Control-Shift-Esc to fix a stalled computer. Once you press these buttons together, it will bring up Windows Task Manager. Here you will find the list of the programs that are running on your PC. The program which is not working, its status column will show it as Not Responding. Select the program and click End Task. This will resolve the issue instantly.

Sometimes, computer freezes occur if you run too many applications at the same time and the computer does not have much resource to run them. In this case, you need to limit the number of program and only run two or three programs at one go.

Does your computer freeze while visiting some certain websites? If yes, then either you have to refrain from visiting those websites or you need to use a different browser. If you find that the web browser is freezing continually, try to uninstall and reinstall it. You can also use another web browser.

You should also check for viruses or spyware. Most of the times computer freezes due to virus and spyware attack. To fix it, you need to run a spyware and antivirus program. It is also suggested to update Windows and install latest patches.

How to Uninstall McAfee Application Control From Your Computer Instantly

This article is mainly about how to uninstall McAfee Application Control. No matter what system is your computer, you can find a suitable removal solution here. Follow the instruction step by step to remove the software. >

How to uninstall McAfee Application Control in Windows 7

1. From the Start menu, select Control Panel.

2. In Large or Small icon view, click Programs and Features. If you’re using Category view, under “Programs”, click Uninstall a program.

3. Select McAfee Application Control, and click Uninstall. Alternatively, right-click the program and select Uninstall.

How to uninstall McAfee Application Control in Windows Vista

1. From the Start menu, select Control Panel.

2. In Classic View, double-click Programs and Features. In Control Panel Home view, under “Programs”, click Uninstall a program.

3. Select McAfee Application Control and click Uninstall. Alternatively, right-click the program and select Uninstall.

How to uninstall McAfee Application Control in Windows XP in default XP view

1. From the Start Menu, select Control Panel.

2. Click the Add or Remove Programs icon.

3. Select McAfee Application Control and click Remove.

Using the Uninstall program from the Start menu

If McAfee Application Control is not listed among the installed programs, an uninstall program for that item might be available on the Start menu. To look for such an option:

1. From the Start menu, select Programs or All Programs.

2. Find the folder for McAfee Application Control and highlight it.

3. In many cases, on the menu that appears, you will see an uninstall option.

Guaranteed Uninstall (recommended)

Some users will fail to uninstall McAfee Application Control via about methods for various reasons. It is also a common case in removing other programs. To solve the problem, a third party uninstaller program has come into being. A professional uninstaller program can solve two basic problems. On the one hand, it can forcibly uninstall McAfee Application Control; on the other hand, it guarantees complete uninstall without any leftovers.

If you are going to learn more about a third party uninstaller program, you can have a look at one of the top uninstallers called Perfect Uninstaller.

Troubleshooting Computer Hardware Problems

Computer hardware problems are quite frustrating and their troubleshooting is more annoying. Most of the time the symptoms do not directly match with the problem you are facing with the hardware. Your computer screen can go blank if the PC has a bad RAM stick but this will not affect the video card in any way. You can always follow specific troubleshooting steps when you know the problem in particular. Getting in touch with professional technical support online team can solve the problem in real time.

Testing the Hardware

As a computer user, it is very important that you know exactly where the hardware problem lies. If you see that after installing a new hardware, your system is not functioning at its optimum level or the hardware is not working, then it is sure that there is some issue with the newly hardware. But do you know that this is not always the case? Sometimes, it happens that certain problems crop up simultaneously with the installation of the new hardware. Uninstall this hardware and check whether the problem still persists and if still it does, then you must have made some parts loose while installing the hardware or there is some other problem with the system.

So, it is better to take the professional help from computer services for installing and uninstalling new hardware.

Testing the Hardware under Different Conditions

Try out testing your new hardware in several conditions to check whether it is functioning properly or not. If you see that the hardware is working well in certain applications but not in others, it night be defective and you had to replace it. This can also imply another thing there may be some other hardware which is defective and which may need replacing. For instance, you encounter some video problem and you troubleshoot the issue only to find that the video card has no problem. Then you are required to change the monitor. Many expert computer support services are there which can help you in testing your hardware.

Checking the Cables

You need to connect CD drives, hard drives and optical drives with the help of the cables. You need to ensure that all the connections are made properly the cables are firmly inserted in their correct position and the connection with the motherboard is also well. Hardware problems are not always caused by putting the computer cables on backwards. On the contrary, it can result in failure of some other hardware.

Upgrading or Replacing Hardware Drives

When you see that your hardware is either functioning partially or is not working at all, you can install updated drivers. This at times fixes the issue in a significant way. Look out the website of the hardware manufacturer for any kinds of updated drivers. If you find one, visit the Control Panel click System Hardware Device Manager. Then double clicking on the type of hardware for which you wish to upgrade your drivers start updating it. Click Drivers Update Drivers and choose the updated drivers. For any problem contact Pc repair services.

Connecting The New Computer To My Server

The server is the computer that will handle the requests for applications, data and also other network services from the other computers that are called as the clients. A relationship between the personal computer and also the server is frequently referred to as the client-server. The advantage of having the server is that the multiple computers may access the similar network and also resources trough the server. You can configure your network settings of the new computer in order to connect to the server. Here is more information for you.

For the first step, you need to configure your security settings of a router by defining your security protocols as good as the IP addresses that you will use by your network. After that, access a graphical-user interface of the router in order to configure your network settings trough the URL supplied in the user manual of the router.

For the second step, you can connect the Ethernet cable to your WAN port of your router and also the other end to a server. The indicator light on your router may illuminate in indicating that the server will be detected.

For the next step, click the “Start” from a system tray that is located at the bottom of a screen on your server. After that, click “My Computer” from an application and also settings menu.

After that, define the resources that will be accessible by the new computer. After that, right click your hard drive and then choose “Sharing and Security” option. Check the “Share this folder” from your network options therefore the computer may access a content of a hard drive on your server.

It is important for you to click the “Start” from a system tray that is located at the bottom of the screen. Click the “Control Panel” from an application and also settings menu. After that, click “Performance and Maintenance” option. Then, click the “System” and click “Computer Name” tab. After that, enter the computer name in order to identify your network.

Click the “Network Connections” from a Control Panel window. After that, right click “Local Area Connection” and also click the “Properties.” Then, enter all IP address for the internal network. The address of the server normally ends in the number one and also looks similar to 192.123.1.1.

You need to connect the Ethernet cable in order to open the WAN port of your router and also the other end to the computer. The indicator light on your router may illuminate in indicating your server is detected.

After that, click the “Start” from your system tray that is located at the bottom of the screen. Click the “Control Panel” from an application and also settings menu. Then, click “Performance and Maintenance” option. Click the “System” and also click “Computer Name” tab. After that, enter your computer name that has applied to the server in previous step.

For the last step, you should restart a server, a router and also the computer. The connection can be activated between the computer and the server